Schneider Electric Power and Energy Meter
Discover Schneider Electric METSEPM2220 panel mounted power and energy meter used for energy measurement. It is used for metering and sub-billing.
Cost management applications
- Electrical installation remote monitoring
- Energy accounting, balancing, and management
- Tenant and sub-billing
- Panel instrumentation
Network management applications
- Power quality analysis of THD and individual harmonics up to 15th and 31st order for Volts and Amps, per-phase
- Measurement of True PF and Displacement PF
- Recording Min/Max values of instantaneous parameters with date & timestamp
- Calculates % unbalance for voltage & current
- Load management by simultaneous display of peak demands of all the four demand parameters (W, VA, VAR, Amps) with date and time of occurrence
Specifications
- Power Quality analysis:
- Up to the 15th harmonic
- Total harmonic distortion
- Type of measurement:
- Apparent power(min/max, total)
- Active and reactive power(min/max, total)
- Current (min/max, avg)
- Voltage (min/max, avg)
- Frequency (min/max, avg)
- Total current harmonic distortion THD (I) (per phase)
- Total voltage harmonic distortion THD (U) (per phase)
- Power factor (min/max, avg)
- Apparent energy (total)
- Active and reactive energy (total)
- Network frequency: 50/60 Hz
- Measurement current: 5…6000 mA
- Frequency measurement range: 45-65 Hz
- Display Type: Backlit LCD
- Display colour: Monochrome
- Control Type: 4 x button
- Power consumption in VA: <= 6 VA at 277 V AC
- Function available: Real time clock
- Sampling rate: 64 samples/cycle
- Communication service: Remote monitoring
