Power Factor Improvement
Power Factor Improvement
Power Factor Improvement involves installing capacitive energy to counter inductive energy in an electrical system. Poor power factor is caused by inductive loads such as motors, coils, transformers. These loads require reactive power to generate magnetic fields thus leading to a lagging current and hence low power factor. Energy Act of 2019 as set out by Energy & Petroleum Regulatory Authority (EPRA) requires that power factor in an electrical system should be at or above 0.9. A poor power factor surcharge is applied on monthly KPLC bill each time power factor is below 0.9.
Popular power factor improvement system comprises of the following
These components are available in various world-reknown manufacturers such as Lovato, Schneider Electric, ABB, Epcos
Seamless Process Automation Limited is authorized by EPRA to carry out eletrical installation across Kenya. We design, manufacture, install, commission and maintain. Talk to us on 0722 880452 or email: [email protected]
“25KVAR Capacitor” has been added to your cart.
View cart
-
50KVAR Contactor
Add to cart
Features
- Product 50KVAR capacitor switching contactor
- Control voltage: 230VAC
- Auxiliary contact: 1NO 1NC
- Durability: 300,000 cycles
- Mounting: DIN Rail
- Maximum operating rate: 240 cycles per hour
- Protection: IP20
-
25KVAR Contactor
Add to cart
Features
- Product 25KVAR capacitor switching contactor
- Control voltage: 230VAC
- Auxiliary contact: 1NO 1NC
- Durability: 300,000 cycles
- Mounting: DIN Rail
- Maximum operating rate: 240 cycles per hour
- Protection: IP20
-
12.5KVAR Contactor
Add to cart
Features
- Product 12.5KVAR capacitor switching contactor
- Control voltage: 230VAC
- Auxiliary contact: 1NO 1NC
- Durability: 300,000 cycles
- Mounting: DIN Rail
- Maximum operating rate: 240 cycles per hour
- Protection: IP20
-
5KVAR Contactor
Add to cart
Features
- Product 5KVAR capacitor switching contactor
- Control voltage: 230VAC
- Auxiliary contact: 1NO 1NC
- Durability: 300,000 cycles
- Mounting: DIN Rail
- Maximum operating rate: 240 cycles per hour
- Protection: IP20
-
-
50KVAR Capacitor
Add to cart
Features for 50KVAR Capacitor
Size: 50KVAR
Voltage: 440VAC
Over Voltage Tolerance: 10%
Service life: 13,000hours
Dielectric Material: Metallized polypropylene film with Zn/Al alloy
Installation: Indoors
Ingress: IP20
Temperature: -25 to 50 degrees
-
25KVAR Capacitor
Add to cart
Features for 25KVAR Capacitor
Size: 25KVAR
Voltage: 440VAC
Over Voltage Tolerance: 10%
Service life: 13,000hours
Dielectric Material: Metallized polypropylene film with Zn/Al alloy
Installation: Indoors
Ingress: IP20
Temperature: -25 to 50 degrees
-
20KVAR Capacitor
Add to cart
Features for 20KVAR Capacitor
Size: 20KVAR
Voltage: 440VAC
Over Voltage Tolerance: 10%
Service life: 13,000hours
Dielectric Material: Metallized polypropylene film with Zn/Al alloy
Installation: Indoors
Ingress: IP20
Temperature: -25 to 50 degrees
-
10KVAR Capacitor
Add to cart
Features for 10KVAR Capacitor
Size: 10KVAR
Voltage: 440VAC
Over Voltage Tolerance: 10%
Service life: 13,000hours
Dielectric Material: Metallized polypropylene film with Zn/Al alloy
Installation: Indoors
Ingress: IP20
Temperature: -25 to 50 degrees
-
12.5KVAR Capacitor
Add to cart
Features for 12.5KVAR Capacitor
Size: 12.5KVAR
Voltage: 440VAC
Over Voltage Tolerance: 10%
Service life: 13,000hours
Dielectric Material: Metallized polypropylene film with Zn/Al alloy
Installation: Indoors
Ingress: IP20
Temperature: -25 to 50 degrees
-
5KVAR Capacitor
Add to cart
Features for 5KVAR Capacitor
Size: 5KVAR
Voltage: 440VAC
Over Voltage Tolerance: 10%
Service life: 13,000hours
Dielectric Material: Metallized polypropylene film with Zn/Al alloy
Installation: Indoors
Ingress: IP20
Temperature: -25 to 50 degrees
-
2.5KVAR Capacitor
Add to cart
Features for 2.5KVAR Capacitor
Size: 2.5KVAR
Voltage: 440VAC
Over Voltage Tolerance: 10%
Service life: 13,000hours
Dielectric Material: Metallized polypropylene film with Zn/Al alloy
Installation: Indoors
Ingress: IP20
Temperature: -25 to 50 degrees
