Motor Starters
Motor Starters
Seamless Process Automation Limited offer a wide range of control panels ranging from simple instrumentation, control and automation panels to large intelligent Motor Starters comprising of integrated Direct-On-Line / Reverse, Start-Delta, Soft-start, VSDs which we tailor to suit the application across a wide range of industries.
We Offer The Complete Control Panel Service
We offer the complete motor starters service. General arrangement drawings and the electrical schematic drawings are generated using electronic drawing packages by our Engineers and are provided to our clients prior to manufacturing. All panels are tested prior to dispatch and can be full integration tested if required. After acceptance testing, we can deliver the panel to site, and if required provide a full installation testing and commissioning service.
Our motor starters include:
- LV power distribution panels
- Operator desks and consoles
- Hardwired LV Motor Control Centres
- Intelligent LV Motor Control Centres
- Instrumentation panels
- Telemetry panels
Panel features include
- Form 1 to Form 4
- Mild steel / Stainless Steel
- Standard or bespoke
- Wall mount or floor standing
- Top or bottom cable entry
- Front or rear access
- Conventional and intelligent MCCs
- Withdrawable systems
- Busbars systems at 50KA for 1 and 3 seconds, 80KA for 1 second and 100KA for 1 second.
Our control panels are built in accordance with IEC 61439-2:2011 and our own stringent internal ISO 9001 procedures
We supplies motor starters from world leading manufacturers including
-
ACS355 ABB Drive
Select options This product has multiple variants. The options may be chosen on the product pageFeatures
- Motor rating 0.37kw to 2.2kw single-phase
- Motor rating 0.37kw to 22kw three-phase
- Output Frequency 0 – 599 Hz
- Flexible fieldbus connectors (Modbus, profibus, Ethernet, CanOpen, DeviceNet
- Conformal coating for increased PCB protection
- Compact design, saves cabinet space
- PC Software tool
- Pre-defined macros for quick setup
-
Danfoss VLT Micro Drive FC51
Select options This product has multiple variants. The options may be chosen on the product page -
Direct On Line Starter
Select options This product has multiple variants. The options may be chosen on the product pageFeatures of Enclosed Direct On Line Starter
- Control Type – pushbutton start Green, pushbutton stop Red
- IP 65 degree of protection
- Overload relay must be ordered separately
- Enclosure Material: Polycarbonate
- Supply voltage between 220 and 440 V
- Device Composition – Contactor
-
Utilisation Category – AC-3
- Component Application – standard
-
0.75KW 1-Phase Variable Speed Drive | Schneider Electric
Add to cart0.75KW 1-Phase VFD
- Nominal power rating is 0.75KW
- Single phase, 200Vac (200Vac to 240Vac) power supply
- Maximum input current is 10A at 200VAC
- Three phase 220VAC output voltage
- Factor for power rating is power x 0.1 (u)
- Compact form factor
- Advanced connectivity, reliably accurate motor control
- Robust design
-
0.75KW Single Phase Variable Speed Drive
Add to cart0.75KW Single Phase VFD
- Nominal power rating is 0.75KW
- Single phase, 200Vac (200Vac to 240Vac) power supply
- Maximum input current is 10A at 200VAC
- Three phase 220VAC output voltage
- Factor for power rating is power x 0.1 (u)
- Compact form factor
- Advanced connectivity, reliably accurate motor control
- Robust design
-
2.2KW Control Techniques VSD | Nidec
Add to cart2.2KW Control Techniques VSD
Power Rating                   :              2.2 kW
Phase                                  :              3
Supply Voltage                :              380 – 480 V ac
Current Rating                 :              6.6 A, 8.7 A
Output Frequency          :              0.1 → 599Hz
For Use With                     :              Asynchronous Motors, Synchronous Motors
Drive Type                         :              Variable Frequency
-
2.2KW Delta Variable Speed Drive | MS Series
Add to cart2.2KW Delta Variable Speed Drive
Power Rating                   :              2.2 kW
Phase                                  :              3
Supply Voltage                :              380 – 480 V ac
Current Rating                 :              6.6 A, 8.7 A
Output Frequency          :              0.1 → 599Hz
For Use With                     :              Asynchronous Motors, Synchronous Motors
Drive Type                         :              Variable Frequency
-
2.2KW Variable Speed Drive | ATV320 Schneider Electric
Add to cart2.2KW Variable Speed Drive
Power Rating                   :              2.2 kW
Phase                                  :              3
Supply Voltage                :              380 – 480 V ac
Current Rating                 :              6.6 A, 8.7 A
Output Frequency          :              0.1 → 599Hz
For Use With                     :              Asynchronous Motors, Synchronous Motors
Drive Type                         :              Variable Frequency
[video width="1280" height="720" mp4="https://seamless-automation.com/wp-content/uploads/2022/10/2.2KW-ATV320-Vid.mp4"][/video] -
45kW Variable Speed Drive Altivar – Schneider Electric
Add to cart- Range of product : 45kW Variable Speed Drive Altivar 610Â
- Product application :Â Fan, pump, compressor, conveyor
- Product destination : Asynchronous motors
- Rated voltage :  380…460 V – 15…10 %
- Motor power kWÂ :Â Â 45 kW for normal duty, 37 kW for heavy duty
-
30kW Variable Speed Drive Altivar – Schneider Electric
Add to cart- Range of product : 30kW Variable Speed Drive Altivar 610Â
- Product application :Â Fan, pump, compressor, conveyor
- Product destination : Asynchronous motors
- Rated voltage :  380…460 V – 15…10 %
- Motor power kWÂ :Â Â 30 kW for normal duty, 22 kW for heavy duty
-
0.16…0.25 A EasyPact TVS thermal overload relay
Add to cartEasyPact TVS thermal overload relay is designed to protect a.c. circuits
and motors against:1. Overloads
2. Phase failure
3. Long starting time
4. Prolonged stalled rotor condition.The thermal overload relay controls permanently the current driven by the motor.
When this current exceeds the setting it’s auxiliary contacts will change
state, causing the motor to stop.
